Presetting various specifications, Custom program capability, meet diverse range of standards, including AATCC, ISO, BS, JIS etc;
Automatic compensating system (PATENT) control the Xenon Lamp Power;
EviewTM touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance, temperature (BPT, BST, chamber), humidity, and plot dynamic curve of them. The operator simply selects the required test module and test standards; English user interface, diagram indicate condition of chamber, easy to use;
PLC (OMRONTM) control, powerful program and storage property, save the parameters when interrupt of power supply.
Low running cost, latest energy-saving technology, 2.5KWH/hour, no need for extra regulation;
Manageable size is most appropriate to testing fabric samples, and easy access to sample holder;
Chamber temperature control, irradiation temperature, and heater raise the temperature, air conditioning refrigeration.
Irradiation control, light irradiance sensor monitor, digital setting, automatic compensating system, stepless adjustable.
Ultrasonic humidification system makes spray water even and low noise. Saturated steam humidifying, industrial refrigerating machine dehumidifying, and close loop control the humidity.
Dual redundant circuit designing to assure unit to work consistently and reliably;
Custom program capability and storage for additional user-defined tests.
Built-in diagnostics and warnings, automatic prompt when lamp or optical filters require changing. Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably;
Use driving clutch to connect turntable and motor, it makes turntable rotate freely and put sample easily without stopping unit;
Safety monitoring point: irradiance, air flow, water level, chamber temperature, chamber door, over current, over voltage.
Power supply Ac220V±5% 50Hz 20A 4500W
Irradiation Source: 3000W Air-cooled Long Xenon Arc Lamp
Average Lamp Life: 1500 hours
Rack Rotating Speed: 1-5r/min
Diameter of Sample Rack 175mm
Specimen Holder Exposure Area: 100×45mm(ISO) 140×70mm(AATCC)
Max Exposure Area of Specimen 450cm2
Chamber Temperature Range 25℃~50℃±2℃
Humidity Range 25％RH-85％RH ±5%
Wide Bandwidth Measurement: (35～55)±1W/m2 @300～400nm
Narrow Bandwidth Measurement: (0.550～1.300)±0.02W/m2 @420nm
Full bandwidth Measurement: no less than 700w/m2@290~800nm
Cooler Power and Cooling Capacity 1000W, 2400cal/hour
Instrument Dimension 900×650×1800mm(L×W×H)
Instrument Weight 230kg
Structure inside the Exposure Chamber:
1. Coping 2. Outlet of wind 3. Bolt 4. Cable
5. Bolt of sleeve 6. Insulation covering 7.Upper board 8. Locknut
9. Upper covering head of xenon arc lamp 10. Sleeve 11. Bolt
12. Impacting tray 13. Outer ring seal 14. Inner ring seal 15. Light filter
16. Glass tube 17. Sample shelf 18. Rubber ring 19. Lower tray
20. Sample turntable 21. Xenon arc lamp 22. Main sleeve 23. Locknut
24 Lower covering head of xenon arc lamp 25 Bolt
Xenon lamp kit
Including: Xenon lamp, CFQ glass tube, metallic connector
AATCC specimen holder (140×70mm)one set for 5 pcs
ISO Specimen holder (100×45mm)one set for 10 pcs
blue wool standard
Inner hexagonal wrench
AATCC Gray scale
AATCC blue wool standard
Irradiance calibration kit
Custom light filters
Related accessoires photoes :